| P/N |
Data Rate |
Distance |
LD |
PD |
DDMI |
| WQS-MPO400-CSR4C |
40Gbps |
300m |
850VSCEL |
PIN |
(Y) |
| WQS-MPO400-SR4C |
40Gbps |
150m |
850VSCEL |
PIN |
(Y) |
Features
4 channels full-duplex transceiver modules
Transmission data rate up to 10.5Gbps per channel
4 channels 850nm VCSEL array
4 channels PIN photo detector array
Low power consumption <1.5W
Hot Pluggable QSFP form factor
Maximum link length of 100m on OM3 Multimode Fiber (MMF)and 150m on OM4 MMF
Single MPO connector receptacle
Built-in digital diagnostic functions
Operating case temperature 0¡ãC to +70¡ãC
3.3V power supply voltage
RoHS 6 compliant(lead free)
Applications
40GBASE-SR4 40G Ethernet
Datacom/Telecom switch & router connections
Data Aggregation and Backplane Applications
Proprietary Protocol and Density Applications
Infiniband transmission at 4ch SDR, DDR and QDR
Description
The Wiitek Technologies WQS-MP400-SR4C is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP+ Transceiver for 40 Gigabit Ethernet Applications. This transceiver is a high performance module for short-range multi-lane data communication and interconnect applications. It integrates four data lanes in each direction with 40 Gbps bandwidth. Each lane can operate at 10.3125 Gbps up to 100 m using OM3 fiber or 150 m using OM4 fiber.
These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface uses a 38 contact edge type connector. The optical interface uses an 12 fiber MTP (MPO) connector. This module incorporates Wiitek Technologies proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service. | 
