MAIN APPLICATIONS
¡¤ Connection between fiber to copper 10Gbps Ethernet equipment function as fiber-to-copper media converter for long distance transmission
¡¤ Media converter for network backbone(SAN, LAN, MAN)
¡¤ Can be applied in Telecommunication room, R&D laboratory, Data center, and etc.
KEY Feature
¡¤ Support Jumbo Frame
¡¤ Transparent Transport and very low delay
¡¤ Support ITUT prescribed DWDM/CWDM wavelength
¡¤ Support DMI function for SFP+ fiber module
¡¤ Support Loopback test function
¡¤ Economic In-band Management function
¡¤ powerful Network Management function£¨Web£¬SNMP£¬Console£©
¡¤ Support hot plugging
¡¤ Support 2U Rack (16 channel) and standalone use
¡¤ Full State Led display
¡¤ Easy installation
¡¤ UTP cable length detection£¨only RJ45 interface£©
Technical Information
Performance Data |
Technical Indexes |
Transmission Speed |
10Gb/s |
Protocols |
IEEE802.3an(10Gbase-T),IEEE802.3ae(10Gbase-R/LRM) |
Access Type |
10G LAN |
Interface Type |
Type: RJ45 To/From SFP+ |
Transmission Distance |
SFP+ module: Up to 40Km
10Gbase-T: 100meters Cat .6a cable |
Maximum Packet
Forwarding Rate |
14,880,950/S |
Network management
information: |
• Card type information
• SFP+ fiber module detection
• SFP+ fiber module DMI function £¨ Temperature ¡¢ Voltage ¡¢ Optical power £©
• Link status detector
• Enable/Disabled Loopback test function
• UTP cable length detection £¨ only RJ45 interface £©
• Remote card's status monitor £¨ only in pairs £© |
power requirement |
Rack-mountable : AC 85 ¡« 220V OR DC -48V
Standalone: AC 220V OR -48V
Power consumption: ¡Ü4W |
Work Environment |
Operating Temp: 0~ 50 ¡æ
Storage Temp: -10~ 70 ¡æ
Humidity: 5%~90% £¨ non-condensing £© |
Dimension |
Card £º 11.5mm £¨ W £© ¡Á 78mm £¨ D £©
Standalone £º 156mm £¨ W £© ¡Á 128mm £¨ D £© ¡Á 32mm £¨ H £© | |